SP SPR mechanical seal submersible dewatering pump
SPR- Rubber vertical Submerged Pump
1. Made of abrasion-resistant metal
2. Submerged pump
3. ISO9001
SP, SPR submersible dewatering pump
The SP/SPR heavy duty cantilever sump pump is designed for applications requiring greater reliability and durability than conventional vertical process pump can offer. The heavy duty cantilever design makes the SP/SPR sump pump ideally suited for heavy continuous handling of abrasive and corrosive liquids and slurries whilst submerged in sumps or pits.
Fully elastomer lined or hard metal fitted. No submerged bearings or packing. High capacity double suction design. Optional recessed impeller and suction agitator available.
SP pump - hard metal construction
SPR pump - rubber covered construction
Model ofDecription
65QV- SP(or SPR)
65- Outlet diameter(mm)
QV- Vertical Tray
SP- Submerged Pump
SPR- Rubber Submerged Pump
Electrical dewatering pump Application:
SP and SPR slurry pumps are vertical, centrifugal slurry pumps which are to handle abrasive, large particle and high concentration slurries.
Mainly is suitable for the transportation corrosiveness, the big pellet, the highly concentrated dregs thick liquid. Widely applies to department and so on metallurgy, mine, coal, electric power, building materials, environmental protection.
Sludge dewatering pump Features / Benefits
This model pumps do not need to be installed with any shaft seal or sealing water.
Even they can run normally in the status of insufficient suction. The pump bodies of SP model are made of wearable metal and impellers are made of wearable metal or rubber polyurethane.
All submerged parts of SPR model pumps have rubber liners. This model of pump is used to handle corrosive slurry.
Cantilevered shaft design
Double suction semi-open impeller
Agitator option keeps solids in suspension
SPR models feature full rubber covering for corrosion resistance
Recessed impeller option passes over sized material
Fully elastomer lined or hard metal fitted. No submerged bearings or packing. High capacity double suction design. Optional recessed impeller and suction agitator available.
No submerged bearings or packing. High capacity double suction design. Optional recessed impeller and suction agitator available
PERFORMANCE PARAMETERES OF SP, SPR SUBMERGED PUMP, please cotact us directly.
SPR- Rubber vertical Submerged Pump
1. Made of abrasion-resistant metal
2. Submerged pump
3. ISO9001
SP, SPR submersible dewatering pump
The SP/SPR heavy duty cantilever sump pump is designed for applications requiring greater reliability and durability than conventional vertical process pump can offer. The heavy duty cantilever design makes the SP/SPR sump pump ideally suited for heavy continuous handling of abrasive and corrosive liquids and slurries whilst submerged in sumps or pits.
Fully elastomer lined or hard metal fitted. No submerged bearings or packing. High capacity double suction design. Optional recessed impeller and suction agitator available.
SP pump - hard metal construction
SPR pump - rubber covered construction
Model ofDecription
65QV- SP(or SPR)
65- Outlet diameter(mm)
QV- Vertical Tray
SP- Submerged Pump
SPR- Rubber Submerged Pump
Electrical dewatering pump Application:
SP and SPR slurry pumps are vertical, centrifugal slurry pumps which are to handle abrasive, large particle and high concentration slurries.
Mainly is suitable for the transportation corrosiveness, the big pellet, the highly concentrated dregs thick liquid. Widely applies to department and so on metallurgy, mine, coal, electric power, building materials, environmental protection.
Sludge dewatering pump Features / Benefits
This model pumps do not need to be installed with any shaft seal or sealing water.
Even they can run normally in the status of insufficient suction. The pump bodies of SP model are made of wearable metal and impellers are made of wearable metal or rubber polyurethane.
All submerged parts of SPR model pumps have rubber liners. This model of pump is used to handle corrosive slurry.
Cantilevered shaft design
Double suction semi-open impeller
Agitator option keeps solids in suspension
SPR models feature full rubber covering for corrosion resistance
Recessed impeller option passes over sized material
Fully elastomer lined or hard metal fitted. No submerged bearings or packing. High capacity double suction design. Optional recessed impeller and suction agitator available.
No submerged bearings or packing. High capacity double suction design. Optional recessed impeller and suction agitator available
PERFORMANCE PARAMETERES OF SP, SPR SUBMERGED PUMP, please cotact us directly.
| specification and performance parameter | |||||
| Model | Capacity(m3/H) | Head (M) | Power(KW) | Rotary speed(rpm) | |
| Y40-25-125 | 6 | 18 | 1.5 | 2900 | |
| YP40-25-160 | 3 | 30 | 2.2 | 2900 | |
| YP50-32-125 | 10 | 18 | 3 | 2900 | |
| YP50-32-200 | 10 | 45 | 7.5 | 2900 | |
| YP50-32-200 | 5 | 12 | 1.5 | 1450 | |
| YP65-40-200 | 20 | 45 | 11 | 2950 | |
| YP65-40-200 | 10 | 12.5 | 3 | 1450 | |
| YP80-50-200 | 45 | 45 | 18.5 | 2950 | |
| YP80-50-200 | 20 | 10 | 4 | 1450 | |
| for more detailed specification and performance data , please contact us directly by email or call. | |||||