Sump Pump Electric Motor Submersible Slurry Pump for mining
Company Profile:
Shijiazhuang An Pump machinery CO.,LTD established in 1986, as one of An pump Group' three branches companies in slurry pump, veritcal pump, veritcal slurry pump, submersible pump, submersible slurry pmp and mining pump etc.
Product Presentation: Sump Pump Electric Motor Submersible Slurry Pump for mining
Feature of Sump Pump Electric Motor Submersible Slurry Pump for mining
CANTILEVERED SHAFT
The standard BP vertical sump slurry pump feature a cantilevered shaft which is up to 2400mm long. The cantilevered shaft means that there is no shaft sealing requirement and the drive end bearings do not come into contact with any pumped product. This reduces the risk of bearing failure and extends the wear life of the pumps.
HEAVY DUTY WET END
Wet end components are manufactured from high quality 27% chrome white iron or rubber coated steel for exceptional wear resistance and service life with minimal corrosion. The heavy duty design can pump high density and abraisive slurries and the large passages of the impeller allows the transfer of large particles without blockages in a wide range of mining, processing and heavy industrial applications. Wet end stub shaft options are available to suit severe duty applications.
COLUMN AND DISCHARGE PIPES
Column and discharge pipes are available in a range of materials to suit the requirements of operators. Standard options include mild steel and rubber lined mild steel. Composite options are available.
VERSATILE DRIVE OPTIONS
BP pumps can be directly driven using electric motors or belt driven with either set speed or variable speed operation.
REMOVABLE STRAINERS
BP pumps feature rubber or cast iron upper strainers and cast iron lower strainers to prevent blockages. The strainers are easily removed for servicing or replacement.
"L" MODELS EXTENDED SHAFT
The extended shaft "L" model features column bearings and shaft seal which further extends the pumping depth and enables the transfer of slurries from deeper sumps and pits.
Application of Sump Pump Electric Motor Submersible Slurry Pump for mining
The BP slurry pumps are mainly used for handing corrosive, coarse particles and high density slurries.
They are widely used in sewage treatment, metallurgy, mining, mineral processing, dredging, dewatering, water treatment, coal
washing, mill, cyclone feed, tailing, power, building material...etc. various industrial sites.
For different duties, pump is named as High head pump, High pressure pump, Mineral processing pump, Mill discharge slurry Pump, Booster pump, Feeding pump, Tailing pump,Transfer pump Thickner Underflow Pump, Dewatering screen pump, Pressure pump, Concentrate pump
Δ Performance parameters of Sump Pump Electric Motor Submersible Slurry Pump for mining
Note: "M": Wear-resistant Alloy. "RU": Rubber
Material of Sump Pump Electric Motor Submersible Slurry Pump for mining
FAQ
A: What kind of company you are?
Q: ShijiazhuangAn Pump Machinery is professional manufacturer in pumps. After accumulation and development of many years, we have formed a complete system of pump design, selection, application, manufacture, marketing and maintenance. We have passed CE, SGS certificate. Our customers are at home and abroad. Hope to coorperate with the worldwide friends.
Q: What's your MOQ?
A: Trial sample order is OK.
Q: What are your payment terms?
A: T/T, L/C, D/P, D/A or as customer required
Q: How about the warranty?
A: One year warranty for pumps, it depends on other pump working condition details.
Q: What is the delivery time?
A: 7-30 days according to customer quantities.
Q: Can you do OEM brand?
A: Yes, Welcome.
Q: What information should I offer to get pump solution?
1, Head: m
2, Flow: m3/h
3, Max Solid size: mm
4, Particle shape (smooth or sharp):
5, Medium pH level:
6,Specific Gravity of the Medium:
7, Temperature:
8, Drive type:
9. Power supply: Electric or Dlesel
10, Voltage and Frequency of the Motor:
Company Profile:
Shijiazhuang An Pump machinery CO.,LTD established in 1986, as one of An pump Group' three branches companies in slurry pump, veritcal pump, veritcal slurry pump, submersible pump, submersible slurry pmp and mining pump etc.
Product Presentation: Sump Pump Electric Motor Submersible Slurry Pump for mining
Δ Specification of vertical sump pump The SP/SPR heavy duty cantilever sump pump is designed for applications requiring greater reliability and durability than conventional vertical process pump can offer. The heavy duty cantilever design makes the SP/SPR sump pump ideally suited for heavy continuous handling of abrasive and corrosive liquids and slurries whilst submerged in sumps or pits. 1.Flow: up to 1206 m3/h 2.Head: up to 54 m 3.Speed: 400 to 2200 rpm 4.Power:15 - 200 kw 5.Particle Size: max 64mm |
Feature of Sump Pump Electric Motor Submersible Slurry Pump for mining
CANTILEVERED SHAFT
The standard BP vertical sump slurry pump feature a cantilevered shaft which is up to 2400mm long. The cantilevered shaft means that there is no shaft sealing requirement and the drive end bearings do not come into contact with any pumped product. This reduces the risk of bearing failure and extends the wear life of the pumps.
HEAVY DUTY WET END
Wet end components are manufactured from high quality 27% chrome white iron or rubber coated steel for exceptional wear resistance and service life with minimal corrosion. The heavy duty design can pump high density and abraisive slurries and the large passages of the impeller allows the transfer of large particles without blockages in a wide range of mining, processing and heavy industrial applications. Wet end stub shaft options are available to suit severe duty applications.
COLUMN AND DISCHARGE PIPES
Column and discharge pipes are available in a range of materials to suit the requirements of operators. Standard options include mild steel and rubber lined mild steel. Composite options are available.
VERSATILE DRIVE OPTIONS
BP pumps can be directly driven using electric motors or belt driven with either set speed or variable speed operation.
REMOVABLE STRAINERS
BP pumps feature rubber or cast iron upper strainers and cast iron lower strainers to prevent blockages. The strainers are easily removed for servicing or replacement.
"L" MODELS EXTENDED SHAFT
The extended shaft "L" model features column bearings and shaft seal which further extends the pumping depth and enables the transfer of slurries from deeper sumps and pits.
Application of Sump Pump Electric Motor Submersible Slurry Pump for mining
The BP slurry pumps are mainly used for handing corrosive, coarse particles and high density slurries.
They are widely used in sewage treatment, metallurgy, mining, mineral processing, dredging, dewatering, water treatment, coal
washing, mill, cyclone feed, tailing, power, building material...etc. various industrial sites.
For different duties, pump is named as High head pump, High pressure pump, Mineral processing pump, Mill discharge slurry Pump, Booster pump, Feeding pump, Tailing pump,Transfer pump Thickner Underflow Pump, Dewatering screen pump, Pressure pump, Concentrate pump
Δ Performance parameters of Sump Pump Electric Motor Submersible Slurry Pump for mining
PUMP MODEL | MATERIAL | CAPACITY (m3/h) | HEAD (m) | MAX PARTICLE SIZE (mm) | SPEED (rpm) | MAX POWER (kw) | |
LINER | IMPELLER | ||||||
40 BP | M | M | 6 - 50 | 4 - 29 | 12 | 1000 - 2200 | 15 |
40 BP | RU | RU | 5.8 - 64.8 | 5 - 54 | 12 | 1000 - 2200 | |
65 BP | M | M | 14 - 120 | 4 - 33 | 15 | 700 - 1500 | 30 |
65 BP | RU | RU | 10.8 - 149 | 5 - 49.5 | 15 | 700 - 1500 | |
100 BP | M | M | 15 - 330 | 4 - 37 | 32 | 500 - 1200 | 75 |
100 BP | RU | RU | 25 - 360 | 6 - 49 | 40 | 600 - 1200 | |
150BP | M | M | 36 - 648 | 5 - 37 | 43 | 500 - 1000 | 110 |
200 BP | M | M | 90 - 828 | 6 - 41 | 64 | 400 - 850 | 110 |
250 BP | M | M | 40 - 1206 | 7 - 36 | 64 | 400 - 750 | 200 |
PLEASE NOTE: "M" MEANS METAL MATERIAL. "R" MEANS RUBBER MATERIAL |
Note: "M": Wear-resistant Alloy. "RU": Rubber
Material of Sump Pump Electric Motor Submersible Slurry Pump for mining
Description | Standard Material | Material Options |
Shaft | 4140 Mild Steel | Available on Request |
Bearing Housing | Cast Iron | |
Column | Mild Steel | |
Upper Strainer | Rubber | Cast Iron |
Lower Strainer | Cast Iron | |
Back Liner | 27% Chrome White Iron | |
Pump Casing | 27% Chrome White Iron | Rubber Lined White Iron |
Impeller | 27% Chrome White Iron | Rubber |
Discharge Pipe | Mild Steel | Rubber Lined Mild Steel/ Composite |
Adaptor Plate | Mild Steel |
FAQ
A: What kind of company you are?
Q: ShijiazhuangAn Pump Machinery is professional manufacturer in pumps. After accumulation and development of many years, we have formed a complete system of pump design, selection, application, manufacture, marketing and maintenance. We have passed CE, SGS certificate. Our customers are at home and abroad. Hope to coorperate with the worldwide friends.
Q: What's your MOQ?
A: Trial sample order is OK.
Q: What are your payment terms?
A: T/T, L/C, D/P, D/A or as customer required
Q: How about the warranty?
A: One year warranty for pumps, it depends on other pump working condition details.
Q: What is the delivery time?
A: 7-30 days according to customer quantities.
Q: Can you do OEM brand?
A: Yes, Welcome.
Q: What information should I offer to get pump solution?
1, Head: m
2, Flow: m3/h
3, Max Solid size: mm
4, Particle shape (smooth or sharp):
5, Medium pH level:
6,Specific Gravity of the Medium:
7, Temperature:
8, Drive type:
9. Power supply: Electric or Dlesel
10, Voltage and Frequency of the Motor: