150mm bore easy operation character long-axis vertical drainage pump
Operational conditions:
1. The temperature of medium shall not be higher than 60Co.
2. The medium shall be neutral and PH value between 6.5~8.5. If the medium is not consistent to the requirements, specify in the order list.
3. For LP type pump, the content of suspended substances in the medium shall be less than 150mg/L; For LPT type pump, the max. Diameter of solid particles in the medium shall be less than 2 mm and the content less than 2 g/L.
4. LPT type pump shall be connected with clean water or soapy water outside to lubricate the rubber bearing. For two-stage pump, lubricant pressure shall not be less than half of operational pressure.
5. The first stage impeller of pump shall be immersed in 0.5m above at min. Water level and generally it is suggested to be within 2~3 m.
6. The wellbore shall be straight.
7. Specify the depth of well or under-liquid depth of pump in the order list.
8. Special operational condition is subject to agreement or technical agreement.
Specification of Vertical Turbine Pump
Operational conditions:
1. The temperature of medium shall not be higher than 60Co.
2. The medium shall be neutral and PH value between 6.5~8.5. If the medium is not consistent to the requirements, specify in the order list.
3. For LP type pump, the content of suspended substances in the medium shall be less than 150mg/L; For LPT type pump, the max. Diameter of solid particles in the medium shall be less than 2 mm and the content less than 2 g/L.
4. LPT type pump shall be connected with clean water or soapy water outside to lubricate the rubber bearing. For two-stage pump, lubricant pressure shall not be less than half of operational pressure.
5. The first stage impeller of pump shall be immersed in 0.5m above at min. Water level and generally it is suggested to be within 2~3 m.
6. The wellbore shall be straight.
7. Specify the depth of well or under-liquid depth of pump in the order list.
8. Special operational condition is subject to agreement or technical agreement.
Specification of Vertical Turbine Pump
Pump type | Outlet diameter(mm) | Capacity (m 3 /h) | Head (m) | Speed (r/min) | Efficiency (%) | Motor Power (KW) |
50LP(T)-10 | 50 | 15 | 10 | 2840 | 50 | 1.5 |
50LP(T)2-20 | 20 | 2870 | 50 | 3 | ||
50LP(T)3-30 | 30 | 2890 | 50 | 4 | ||
50LP(T)4-40 | 40 | 2890 | 50 | 5.5 | ||
50LP(T)5-50 | 50 | 2890 | 50 | 7.5 | ||
50LP(T)6-60 | 60 | 2900 | 50 | 11 | ||
50LP(T)7-70 | 70 | 2900 | 50 | 11 | ||
50LP(T)8-80 | 80 | 2930 | 50 | 11 | ||
50LP(T)9-90 | 90 | 2930 | 50 | 15 | ||
50LP(T)10-100 | 100 | 2930 | 50 | 15 | ||
65 LP(T)-10 | 65 | 30 | 10 | 2840 | 55 | 2.2 |
65 LP(T)2-20 | 20 | 2890 | 55 | 4 | ||
65 LP(T)3-30 | 30 | 2890 | 55 | 7.5 | ||
65 LP(T)4-40 | 40 | 2890 | 55 | 11 | ||
65 LP(T)5-50 | 50 | 2890 | 55 | 11 | ||
65 LP(T)6-60 | 60 | 2900 | 55 | 15 | ||
65 LP(T)7-70 | 70 | 2900 | 55 | 15 | ||
65 LP(T)8-80 | 80 | 2930 | 55 | 18.5 | ||
65 LP(T)9-90 | 90 | 2930 | 55 | 18.5 | ||
65LP(T)10-100 | 100 | 2930 | 55 | 22 | ||
80LP(T)-15 | 80 | 50 | 15 | 2900 | 60 | 5.5 |
80LP(T)2-30 | 30 | 2900 | 60 | 11 | ||
80LP(T)3-45 | 45 | 2900 | 60 | 15 | ||
80LP(T)4-60 | 60 | 2930 | 60 | 22 | ||
80LP(T)5-75 | 75 | 2930 | 60 | 30 | ||
80LP(T)6-90 | 90 | 2950 | 60 | 30 | ||
80LP(T)7-105 | 105 | 2950 | 60 | 37 | ||
100LP(T)-15 | 100 | 80 | 15 | 2900 | 65 | 7.5 |
100LP(T)-30 | 30 | 2930 | 65 | 15 | ||
100LP(T)2-60 | 60 | 2930 | 65 | 30 | ||
100LP(T)3-90 | 90 | 2950 | 65 | 45 | ||
100LP(T)4-120 | 120 | 2950 | 65 | 55 | ||
150LP(T)-20 | 150 | 150 | 20 | 1460 | 73 | 15 |
150LP(T)2-30 | 30 | 1470 | 72 | 22 | ||
150LP(T)2-40 | 40 | 1470 | 73 | 30 | ||
150LP(T)3-60 | 60 | 1480 | 72 | 45 | ||
150LP(T)4-80 | 80 | 1480 | 72 | 55 | ||
150LP(T)5-100 | 100 | 1490 | 72 | 75 | ||
150LP(T)6-120 | 120 | 1490 | 72 | 90 | ||
200 LP(T)-15 | 200 | 300 | 15 | 1470 | 75 | 22 |
200 LP(T)-20 | 20 | 1470 | 75 | 30 | ||
200 LP(T)2-30 | 30 | 1480 | 75 | 45 | ||
200 LP(T)2-40 | 40 | 1480 | 75 | 55 | ||
200 LP(T)3-65 | 65 | 1490 | 74 | 90 | ||
200 LP(T)4-90 | 90 | 1490 | 73 | 110 |