Rugged heavy duty slurry pump for medium to lower heads
BL series pump incorporates the same design points of the BH pump plus higher efficiency impellers at an attractive initial cost.
Designed for rugged duties while offering higher efficiencies, the BL series is a combination of the proven BH unique features. The L series provides the widest range of hydraulics from the 3/4" to a 26" discharge pumps. The 3/4" is perfect for the laboratory or in demonstration plants.
FEATURES / BENEFITS
- Size range (discharge)
.75" to 26"
20 mm to 650 mm - Capacities
to 45,000 gpm
to 10,225 m3/hr - Heads
to 180 ft
to 55 m - Pressures
to 250 psi
to 1,725 kPa
BENEFITS
- Heavy duty construction with through-bolt design provides ease of maintenance and results in less down time
- Ductile iron fully lined casing provides durability, strength and long service life
- Large diameter, slow turning, high efficiency impellers (up to 90%+) result in maximum wear life and lower operating costs
- Large, open internal passages reduce internal
velocities maximizing wear life resulting in lower operating costs - Thick elastomer or metal bolt-in liners provide superior corrosion resistance plus offer ease of liner change-out and intermixability to reduce over all maintenance costs and maximize wear life
- Designed for rugged duties while offering higher efficiencies
- Minimal shaft/impeller overhang reduces shaft deflection and increases packing life
- Cartridge-style bearing assembly allows for maintenance in a clean environment without removal of the pump, resulting in reliable operation and prolonged bearing life
- Grease or oil lubrication bearing assembly options offer ease of maintenance and reduced down time
- Full flush gland, low flow, and dry running centrifugal seals reduce flush water usage minimizing pump operating costs
- Mechanical seals reduce flush water usage minimizing pump operating costs
- Erosion and corrosion resistant elastomers or alloys are available to handle solids laden and/or corrosive slurries
